4usemethod4.1adjustmentoperationa.Installthedeviceproperly,andthenrotatetochecktherunoutofthecirculararcsurfaceaofthedevice.Thetoleranceshouldbewithin0.1mm.b.Thewiretobepeeledshallbeplacedintheclosedcenterofthebladeandconcentricwiththedevice.c.Centrifugalgripadjustment:useanAllenwrenchtoloosen1(3)screwsandturntheflange.Clockwiseistoreducetheresettorque(increasethecentrifugalgrip),andcounterclockwiseistoincreasetheresettorque(decreasethecentrifugalgrip).Theresettorqueshouldbebetween150gand200g,andthisparametercorrespondsto5000r/minofthedevice.Thecorrespondingresettorqueshallbeadjustedatdifferentspeeds.Itisrecommendedthatthespeedbebetween5000r/minand6000r/min.d.Toadjustthewirediameterofpaintstripping,turnscrew2withanAllenwrenchtoincreasethewirediameterclockwiseanddecreasethewirediametercounterclockwise.杭州千和剥漆刀是变压器刮漆的理想工具。湖南智能剥漆刀调试

本实用新型的目的是提供一种电感生产自动剥漆机，解决了现有技术中在电感线圈剥漆时，直接使用三个卡爪剥离，卡爪之间的间距无法调节，导致不能适用于各种型号的线圈，局限性较强，在面对不同型号的线圈时，需要更换不同的夹具，更换时间较长，加工速度降低的问题。The purpose of the utility model is to provide an automatic paint stripping machine for inductor production, which solves the problem that in the prior art, three claws are directly used to strip the paint of an inductor coil, and the spacing between the claws cannot be adjusted, resulting in that it can not be applied to various types of coils, and has strong limitations. When facing different types of coils, it needs to replace different clamps, which takes a long time to replace and reduces the processing speed.湖北磁性剥漆刀供应商杭州千和剥漆刀故障率低。

漆包线剥漆机，采用新工艺特硬材质高速剥漆刀头，能彻底除去线面上任何坚硬的绝缘漆，搪瓷漆，ML，lsonel等，而绝不损害铜线本身。特别适合需剥漆直到线圈底部的情况使用，操作方便，效果出色，本机设有剥漆长度终止装置，可准确控制漆包线的剥漆长度，能自动调校线身弧度，在没有严重污染及危害性的情况下，剥漆工作快捷而且安全。是电机、电器、仪表、变压器、电子、家用电器及电动工具等线圈制造和机械维修行业理想的刮漆工具。

电感是由线圈组成，线圈是由导线一圈靠一圈地绕在绝缘管上，导线彼此互相绝缘，而绝缘管可以是空心的，也可以包含铁芯或磁粉芯，漆包线电感线圈的端部作为引脚，大都需要剥除漆皮这一加工步骤。The inductance is composed of coils, which are made up of wires wound round by round on an insulating tube. The wires are insulated from each other. The insulating tube can be hollow, or it can contain iron core or magnetic powder core. The end of the enameled wire inductance coil is used as a pin, and most of them need to be peeled off.杭州千和剥漆刀挂出多种漆膜。

Enamelled wire is a main type of winding wire, which is composed of conductor and insulation layer. The bare wire is annealed and softened, and then painted and baked for many times. However, it is not easy to produce products that meet both standard requirements and customer requirements. It is affected by raw material quality, process parameters, production equipment, environment and other factors. Therefore, the quality characteristics of various enameled wires are different, but they all have four major properties: mechanical performance, chemical performance, electrical performance and thermal performance.千和的剥漆刀PPKSS性价比很高。湖北节能剥漆刀

杭州千和剥漆刀是线圈制造的理想工具。湖南智能剥漆刀调试

The enameled wire stripping machine provided by the utility model comprises: 1. The setting of the through-hole in the center of the rotating shaft enables the enameled wire to pass through the through-hole and strip the paint continuously in multiple sections. 2. The setting of the transmission assembly reserves enough paint stripping space for the through-hole of the rotating shaft. 3 the shaft end of the paint stripping knife is fitted and connected with the rotating shaft by being embedded in the accommodation hole at the end of the rotating shaft, so that the joint can be closely fitted.湖南智能剥漆刀调试

杭州千和精密机械有限公司在磁力张力器、伺服张力器，气动剪刀、剥漆刀，线嘴、导针，绕线机治具一直在同行业中处于较强地位，无论是产品还是服务，其高水平的能力始终贯穿于其中。公司位于康中路16号2幢2层207室，成立于2006-11-27，迄今已经成长为机械及行业设备行业内同类型企业的佼佼者。千和精密以磁力张力器、伺服张力器，气动剪刀、剥漆刀，线嘴、导针，绕线机治具为主业，服务于机械及行业设备等领域，为全国客户提供先进磁力张力器、伺服张力器，气动剪刀、剥漆刀，线嘴、导针，绕线机治具。产品已销往多个国家和地区，被国内外众多企业和客户所认可。